Belkin F8M120cw 8820ek00824 User Manual page 5

InTIAl seTUp
sections
table of contents
or
3. Store that frequency in memory by pressing and holding one of the two MEM buttons. When the frequency
is stored successfully, the product will beep and MEMORY 1 or MEMORY 2 will show on the display.
4. Turn on your car stereo and set the input source to FM.
5. Tune your car stereo so that its FM frequency matches the CarAudio Connect FM.
6. If possible, store the frequency in one of your car stereo's preset buttons. Typically this is done by pressing
and holding the chosen preset button until the stereo beeps or gives some indication that the frequency
has been stored.
7. Insert the product's audio cable into the headphone jack of your phone.
* If you hear static as you travel from one part of town to another, press the Clearscan button again to
find a better frequency .
CarAudio Connect FM
1 2 3
EN-3
4 5 6