Removing Port Mirroring - Avaya Cajun P550R Release Notes

Removing Port
Mirroring
Viewing
Information
about Port
Mirroring
10
* Note: Avaya recommends that you mirror traffic to a port
of the same speed or faster than the source port.
<channel> is the mirror channel that you want to use (1-4).
{TX| RX |Both} is the direction of traffic that you want to
mirror.
* Note: You can mirror transmit traffic of only one source
port to the mirror port. You cannot mirror transmit
traffic of multiple source ports to one mirror port.
{always | disable | periodic} is how often you
want the mirror port to receive traffic samples.
<max-packets-sec-value> is the maximum number of
packets per second that you want the mirror port to receive.
(Enter a value for this variable only if you set the sampling to
periodic.)
To remove port mirroring, use the following CLI command:
>(config)# clear port mirror fabric_mode2
channel <channel>
where <channel> is the mirror channel that you want to remove.
To view information about port mirroring, use the following CLI
command:
>(config)# show port mirror fabric_mode2
This command displays the source ports, mirror port, direction being
mirrored, sampler type, and maximum packet per second for all port
mirrors that are currently set up.
June 14, 2001
610-0184-095