Sharp SX862 User Manual page 27

Call Waiting
This service notifies you of another incoming call while you
have a call in progress.
1.
During a call, press [Options] and select "Hold &
Answer" to answer the second call.
The first call is put on hold and you can now talk to the
second caller.
You can also answer the second call by pressing D.
Note
• You need to set "Call Waiting" to "On" if you wish to use the
Call Waiting service (p. 131).
• Call Waiting service may not be available on all networks.
Contact your service provider for more information.
• If you do not wish to answer the second call, press [Options]
and select "Busy" in step 1. If "Reject" is selected, the log of
the second call is saved as a missed call.
Conference Call
Conference call is a call with more than 2 participants. You may
include up to 5 participants in a conference call.
To Make a Conference Call
You must have one active call and one held call.
1.
During a call, press [Options] and select "Conference
All" to join the conference call.
2.
Press F to end the conference call.
Note
• The conference call service may not be available on all
networks. Contact your service provider for more
information.
• To end the call with all participants, press [Options] and
select "End All Call(s)".
• To reject adding more participants to the current party, press
[Options] and select "Reject", or you can send the busy tone
by selecting "Busy".
• You have more options for the conference call after selecting
"Conference All" in step 1:
• To put all participants on hold, select "Hold All".
• To put all participants except the current call on hold,
select "Private".
To Add New Participants to the Conference Call
1.
Press [Options] and select "Dial New Number".
2.
Enter the number you wish to include in the conference
call and press D to dial.
3.
Press [Options] and select "Conference All" to join the
conference call.
If you wish to add other participants, repeat steps 1 to 3.
Voice Call/Video Calling Functions 27