Sharp SX862 User Manual page 115

Backlight (M 9-2-8)
The backlight will shut off if you do not press the keypad for a
certain length of time. You can specify a desired time to elapse
before the backlight shuts off, which will help conserve battery
life.
Tip
• When you purchase this phone, Backlight is set to 15
seconds.
To Select the Backlight Time Out Duration
→
"Settings" "Phone Settings" tab
→
Settings" "Backlight"
1.
Select the desired time.
When selecting "Other", enter the desired time.
Select "Off" to shut it off.
To Adjust the Brightness of the Backlight
→
"Settings" "Phone Settings" tab
→
Settings" "Backlight"
1.
Press a (Light) and b (Dark) to switch between 5
levels of clarity.
2.
Press B.
Note
• You can set the auto brightness adjustment function by
selecting "Auto Sensor" in step 1.
→
"Display
→
"Time Out"
→
"Display
→
"Brightness"
Setting the Display Saving
The screen of this phone will automatically turn off after a given
amount of time. You can change the length of time before the
Display Saving goes into effect, which will help conserve
battery life.
→
"Settings" "Phone Settings" tab
→
Settings" "Display Saving"
1.
Select the desired time.
When you purchase this phone, Display Saving is set to 2
minutes.
Note
• Display Saving does not work while you are using WAP or an
application.
• To cancel the Display Saving: The display saving continues
until either a key is pressed or there is an incoming alert. The
first key press only cancels this function. You must press
another key in order to enter any numerical or text value.
(M 9-2-9)
→
"Display
Settings 115