Sharp SX862 User Manual page 122

Change Menu (M 9-10)
You can change the type of menu to display.
→
"Settings" "Phone Settings" tab
1.
Select "Standard Menu" or "Large Font Menu".
Security Settings
You can set various locks on your phone such as PIN Entry and
Handset Lock.
→
"Settings" "Phone Settings" tab
Settings"
Enabling/Disabling the PIN Code
If the PIN code is enabled, you are asked to enter the PIN code
each time the phone is switched on. Your PIN code is registered
on the SIM/USIM card and you should have been made aware
of the code when you purchased the SIM/USIM card. Contact
your service provider for further details.
Select "On" for "PIN Entry" and enter your PIN code if you wish
to activate the PIN lock.
Note
• If you enter the wrong PIN code three times, the SIM/USIM
card will lock. To remove the lock, contact your service
provider or SIM/USIM card vendor.
122 Settings
→
"Change Menu"
→
"Security
To Change the PIN Code
This allows you to change the PIN code registered on the SIM/
USIM card. Before you change the PIN code, select "On" for
"PIN Entry".
Enter the existing PIN code for "Change PIN" after selecting
"PIN Entry", and enter a new PIN code twice.
To Change the PIN2 Code
PIN2 is a second PIN code used to unlock certain features of a
SIM/USIM card, such as Fixed Dialling and Call Cost metering.
Not all SIM/USIM cards use the PIN2 code. This menu may not
be displayed depending on the type of your SIM/USIM card.
Enter the existing PIN2 code for "Change PIN2", and enter a
new PIN2 code twice.
Handset Lock
The Handset Lock prevents unauthorised use of the phone or
certain features on the phone when the power is turned on. By
setting this option on, your phone or certain features on your
phone are locked until the correct handset code is entered.
Select "On" for "Handset Lock" if you wish to activate the
Handset Lock.