Reversing Camera - Renault Clio 4 Estate Handbook

REVERSING CAMERA

1
operation
When reversing (and up to approxi-
mately five seconds after shifting to
another gear), a camera 1 on the tail-
gate transmits a view of the surround-
ings to the rear of the vehicle to a
touch-screen 2, accompanied by two
clearance gauges 3 and 4 (mobile and
fixed).
Note: make sure that the reversing
camera is not obscured (by dirt, mud,
snow, etc.).
Dynamic gauge 3 (depending on the
vehicle)
This is shown in blue on screen 2. It in-
dicates the vehicle trajectory according
to the position of the steering wheel.
(1/2)
2
Fixed gauge 4
The fixed clearance gauge comprises
coloured markers A, B and C, indicat-
ing the distance behind the vehicle:
– A (red) approximately 30 centime-
tres from the vehicle;
– B (yellow) approximately 70 centi-
metres from the vehicle;
– C (green) approximately 150 centi-
metres from the vehicle.
This gauge remains fixed and indicates
the vehicle trajectory if the wheels are
in line with the vehicle.
3
C
b
A
This system is initially used with the aid
of several gauges (mobile for trajectory
and fixed for distance). When the red
zone is reached, use the bumper image
to stop accurately.
Note: depending on the vehicle, certain
parameters can be adjusted. Refer to
the handbook for the equipment.
4
2.31