Renault Captur Handbook page 57

TRIP COMPUTER: trip settings
The display of information shown below DEPENDs ON THE VEHICLE EQUIPMENT AND COUNTRY.
Examples of selections
SERVICE INTERVALS
Resetting: to reset the distance before service, press and hold button 2 or 3 for approximately 10 seconds until the display
shows the mileage permanently.
NB: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the
event of an oil change, both the distance before the next service and the next oil change should be reset.
(3/5)
SERVICE IN
30,000 kms / 12 months
SERVICE DUE
300 kms / 24 days
Service required
Interpreting the display selected
h) Mileage before service or oil change.
Mileage before service
With the ignition switched on but the engine not run-
ning, when the message "Mileage before service" is dis-
played, press button 2 or 3 for around five seconds to dis-
play the mileage before the next due service.
Distance remaining until the next service (displayed in miles/
kilometres and months), then when the service nears, sev-
eral scenarios are possible:
– distance/time remaining less than 900 miles (1,500 km)
or one month: the message "Service due in" is displayed
accompanied by the nearest term (distance or time);
– distance equal to 0 miles or service date reached: the
message "service vehicle" is displayed accompanied by
©
the warning light.
The vehicle requires a service as soon as possible.
1.51