Renault Captur Handbook page 165

SEAT COVERINGS
16
D
18
Removing the seatback cover D
– Fold down the seatback D to the
base using the stalk 16;
– remove the self-grip bands 17 be-
tween the seatback and the base;
– open the zip fastener 18 of the seat
back D;
– reinsert the seatback D and ensure
that it is well locked;
(5/5)
17
– open the zip fastener 20 of the seat
back D;
– remove the cover according to the
method shown (movement A).
When moving the rear
seats, ensure that nothing
obstructs the anchorage
points (passenger's arm or
leg, a pet, gravel, cloth, toys, etc.).
D
20
19
Replacing the seatback cover D
– Position the cover on the seat-
back D;
– close the zip fastener 20;
– slide the lower cover between the
seatback D and the base;
– move the seatback D onto the base
using the stalk16;
– close the zip fastener 18 of the seat
back D;
– attach the self-grip bands 17 be-
tween the seatback and the base;
– raise the seatback completely D and
ensure that it is well locked;
– attach the self-grip bands 19.
When refitting the seat-
back, make sure it is cor-
rectly locked in place.
If seat covers are fitted,
make sure these do not prevent the
seatback latch from locking in.
Make sure that the seat belts are
positioned correctly.
Reposition the headrests.
4.19