Manhattan Plaza DS-100 Quick Start Manual

6
WATCH TV
Change the channel you are watching bar to show the programmes showing
by entering the three-digit channel at different times.
number using the number buttons on
Press
the remote control. Or, you can press
channel and programme highlighted by
the or buttons to step through
the orange bar. If the programme is on at
the channels in order.
the time, the receiver will switch to that
Press these buttons to turn the channel immediately. If the programme
volume up and down. You can is scheduled for later on, a reminder is set.
turn the sound off altogether with When the programme is about to start, a
the button. The sound comes back
message is displayed on screen and, after
on when you press again. a few seconds, the receiver automatically
switches to the necessary channel.
Many freesat programmes are
broadcast with subtitles. You display
the subtitles by pressing the button,
and turn them off by pressing again.
When an audio description (a
spoken description of the broadcast) is
available, turn on with the button
on the remote control, and turn it off by
pressing again.
services are available from some
freesat channels, and you can use them
by pressing
watching the relevant channel. This
displays a menu of services available
from that channel or broadcaster.
When you have finished with the
You can find out the programmes
interactive services, return to watching
scheduled to be shown on all the
TV by pressing
freesat channels up to eight days ahead
Your receiver can be switched on
using the button. Press the button
and off by pressing the
and then .
Leave the Plaza DS•100 plugged in at
Browse the scheduled programmes all times. It will automatically go into
using the and buttons to move standby when it is not used for a long
through the channels, and the and time.
buttons to move the orange highlight
This is a brief introduction to the features of your Plaza DS•100 receiver.
More details are given in the user guide.
to switch the receiver to the
Standby - switches the
receiver on and off.
Mute - silences the
receiver's sound.
0, 1 ... 9 - buttons to
choose channels and so on,
and to enter your postcode.
Switches to the last
channel watched and
switches between freesat
and non-freesat channel
lists.
Switches to the next
Digital text and interactive
channel in the favourite
channels list.
or the button while
Displays (and exit) the
main menu screen.
Displays channel and
programme information.
or .
Up, down, left, right -
moves the highlight
button.
bar in menus and in the EPG.
Allows you to browse the
channels and programmes.
Chooses the option in
the menu.
Displays the channel list.
Plaza DS •100 Remote Control
Displays the electronic
programme guide (EPG).
Exits a menu and returns
to the main menu.
Exits a menu and returns
to normal TV viewing.
Switches between
freesat and the TV's tuner.
Turns the volume up and
down.
Switches to the next or
previous channel.
Moves one page up or down
the channel list.
Switches audio
description on and off.
Switches between
widescreen display formats
on a conventional TV.
Switches subtitles on and
off.
Displays the interactive
and digital text services
(where available).
Chooses
options within menus.
V2.1
Quick Start Guide
How to set up and use your
Plaza DS •100
freesat digital TV receiver
1
UNPACK
Unpack and check
the contents of your
Manhattan Plaza DS•100
freesat receiver pack.
The pack should contain the following.
Plaza DS•100 receiver
Remote control
Batteries for the remote control
Scart lead to connect to the TV
Quick start guide
User guide