Specifications; Fcc Information - Kenmore Choice 69623 Owner's Manual

pAN AND DOUGH BLADE
t Clean these parts thoroughly using a sponge or
soft cloth dampened in lukewarm water and
mild dishwashing liquid. After cleaning, dry
them completely and store them inside the
main unit.
NOTE:
The pan is coated
with fluorine resin.
Use only plastic
utensils to
scratching or damag-
ing this coating.
t
BAKING CRUMBS 1
Remove flour, bread crumbs and all foreign
matter from the inside of bread machine with a
damp cloth.
SHAFT l
Remove all crumbs after each use. Use a
sponge or cloth to wipe clean.
AiR INTAKE !
Occasionally clean the air intake vent situated
on the bottom of the unit to prevent it from
dogging.
Use vacuum cleaner crevice tool or soft brush
to do this.
SPECiFiCATIONS
SYSTEM
POWER SUPPLY
POWE R 750W
CONSUMPTION
REMIX METHOD
120V AC 60Hz
SIZE 10-5/8"W x 12"D x 14-3/4"H
inches
WEIGHT 19-1/2 Ibs. (8.gKg)
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of tile FCC Rule. These limits are designed to provide reasonable protection against harmful
interference in a residenfi_ installation. This equipment generates, uses, and can radiate radio frequency
ene_ and, if not i_talled and used in accordance with the instructions, may cause harmfulinterference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful Lute to radio or television reception, which
can be determined by turning the equipment off and on, t:he user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Warning- This equipment may generate or use radio fi'equency energy. Changes or modifications
to this equipment may cause harmful interference unless the modifications are expressly approved in
the instruction manual. The user could lose the authod::ty to operate this equipment if an unauthorized
changes or modification is made.
- 14-