Before Asking For Service - Kenmore Choice 69623 Owner's Manual

BEFORE ASKING FOR SERVICE
PROBLEM
The unit does not start,
Water or ingredients leak
from the pan.
POSSIBLE CAUSE
• Is the power cord piugged in? •
• Does the clock display indicate 'P
OE02?
Dough does not kne,ad or
mix.
Smoke is generated during
baking.
Bread cannot be baked.
Bread cannot be baked
with the program timer.
• Does the clock display indicate
OE01 ?
• Is the pan mounted correctly?
Is the orange rubber seal/gasket on
the shaft in good condition?
• Is the dough blade attached!
correctly? i
• _clock display indicate Ert
• Have flour or other ingredientsJ
spilled on the heating element?
• Is the Mixing program being used?
SOLUTION
If not, plug the power cord in securely,
The unit wiii not operate if the oven's
interior temperature is above 131"F -
such as immediateiy a_er baking, Open
the _idand let cool down,
If so, contact qualified service
personnel.
• If not, mount the pan correctly.
• If not, replace the orange rubber
seal/gasket.
• If not, remove the pan, take out
ingredients, and attach the dough blade
correctly.
• If so, let unit rest for approx. 30 minutes
until this disappears from display.
If so, clean the inside of the Bread
Machine. If smoke results from any
other cause, unplug the power cord and
contact qualified service personnel,
The Mixing program is designed iust for
dough making and the unit wi!i not enter
the baking p_ocess. Remove the
ingredients, lap,ace with new
ingredtentsl and sta_the unit in the right
program.
Is the dough blade properly • If not, attachthe dough blade correctly,
attached?
Does the clock display read HE01
or HE02?
Was glass lid opened during
• Does the clock display indicate the
present ti me ?
• Is the program timer set correctly?
• Contact qualified service personnel.
• Keep the glass lid closed during baking.
Correctly set to read the current time of
day.
Carefully read instructions for setting
the program timer.
• Does the c!ockdisplay flash on and A power failure may have occurred.
off reading 12!007 Remove ingredients and start all over.
The program timer cannot
Did you check to see that the timer Carefully read the instructions for
lamp lights up? Is the program timer setting the program timer.
be set.
set correctly.
?
-11 -