Tm Program; Setting The Optional Programmable Timer - Kenmore Choice 69623 Owner's Manual

SETTING THE OPTIONAL PROGRAMMABLE
TIMER
This optional feature allows you to begin the prep-
aration of yeast and whole grain breads and
doughs up to 12 hours before you want them
ready.
|
Press SELECT for Yeast Bread, Whole Grain Bread
or Multi-Logic
TM
.
If using Multi-Logic
TM,
refer to the programming
instructions Steps 5, 6, 7, 8, 9, 10 and 11 on page 8.
Press BAKING CONTROL for the desired dark-
ness of the crust ff you plan to bake the bread in
the Bread Machine.
|
Press TIMER SET. The display will flash ON at
12:00 A.M.
Set the hour and minutes you want your bread or
dough to be ready by pressing "H" (V) or "M" (A).
When programming the time you want, keep in
mind the difference between AM and PM.
m-m
Press TllV_ER SET to lock in the programmed time.
The Bread Machine will beep once and the TIMER
indicator Light will be Lit,
|
Proceed with instruction Steps 1, 2, 3, and 4, given
on page 6.
You should press TIMER SET if you wish to verify
the programmed time. The programmed time will
appear for 3 seconds and will then return back to
the current time of da3a
Note: Timer Setting
To prevent the quality of ingredients from deteri-
orating, the timer cannot be programmed for pe-
riods over 12 hours. If you make a mistake while
setting the timer, the unit will generate a "long
beep" error sound. In this case, reset the tLrne
display to read the correct time.
The following chart dhows the minimum time
required a each program.
BREAD LENGTH OF PROGRAM
YEAST BREAD 4 hours 4 minutes
WHOLE GRAIN 4 hours
QUICK BREAD 1 hour 33 minutes
MIXING 1 minute to 15 minutes
MULTI=LOGICTM 1 hours, 35 minutes to
PROGRAM 5 hours
-10-