1
camera module
10 Gently pry the camera module off the aluminium foil.
Replacing the Camera Module
1 Follow the instructions in "Before You Begin" on page 9.
2 Adhere the camera module to the aluminium foil.
3 Use the alignment posts on the display back cover to place the camera
module in position.
4 Connect the camera cable to the connector on the camera module.
5 Replace the display bezel (see "Replacing the Display Bezel" on page 54).
6 Replace the display assembly (see "Replacing the Display Assembly" on
page 52).
7 Replace the keyboard (see "Replacing the Keyboard" on page 45).
62
Camera Module
2
camera cable connector
2
1