Epson PowerLite 955W Quick Setup

PowerLite 97/98/99W/955W/965
®

Quick Setup

Before using the projector, make sure you read the safety instructions in the
online User's Guide.
Connect the projector
Choose from the following connections. See the sections below or the online
User's Guide for details.
Computer
S-Video Video L R
USB port
Connect the square end of a USB cable to the projector's USB-B (square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows XP or later: After turning on the projector, follow the on-screen
®
instructions to install the Epson
on first connection). If the software screen does not display automatically,
open My Computer or Computer, then double-click EPSON_PJ_UD.
Mac OS X 10.5.1 or higher: After turning on the projector, the setup folder
for USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Computer port
Connect one end of a VGA cable to the projector's Computer1 or
Computer2 port, and the other end to your computer's
you are using a laptop, switch it to external display (see "Troubleshooting").
You can also connect an audio cable.
HDMI port
Connect one end of an HDMI cable to the projector's HDMI port and the other
end to an HDMI port on your computer.

Wired network

You can connect the projector to your network using an Ethernet cable.
S-Video Video L R
See "Project over a wired network" for instructions.
*412613300*
*412613300*
USB cable
VGA cable
HDMI cable
Audio cable
USB Display software (EMP_UDSE.EXE; only
®
monitor port. If

Video device

Connect up to 5 video devices and use the Source Search button on the
projector or remote control to switch between them.
S-Video Video L R
Camera, USB device, or Epson DC-06 document camera
Connect a digital camera, USB flash drive, USB storage device, or Epson DC-06
document camera to the projector's USB-A (flat) port.
S-Video Video L R
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector's PC Free feature. See the online User's Guide for details.
External monitor, external speakers, and microphone
You can also connect an external monitor, external speakers, or a microphone
to your projector to enhance your presentations. See the online User's Guide
for details.
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector. The
3
Open the A/V Mute slide all the way.
S-Video cable
RCA video cable
Audio cable
HDMI cable
Component video to VGA cable
Audio cable
USB cable
power light on the projector turns blue.