Error Message List; Error Messages When Starting Up Easymp Multi Pc Projection - Epson PowerLite Pro Z8250NL Operation Manual

Error Message List

Error Message List

Error Messages when Starting up EasyMP Multi PC Projection

Error Messages
This application is already running.
Cannot start this application because other EPSON
Projector software (Quick Wireless Connection) is already
running.
Cannot start this application because other EPSON
Projector software (USB Display) is already running.
Cannot start this application because other EPSON
Projector software (EasyMP Network Projection) is already
running.
EasyMP Multi PC Projection initialization failed.
Cannot open the shortcut file.
Files are missing or invalid. Failed to start the application.
Reinstall/remove the application.
Network adapter information could not be obtained.
Cannot start from the shortcut while projecting.
Two instances of EasyMP Multi PC Projection have been started.
Close the other projector software and then start EasyMP Multi PC Projection.
Restart EasyMP Multi PC Projection. If the message still appears, uninstall and then reinstall EasyMP
Multi PC Projection.
s "Uninstalling the Software" p.46
s "Installing the Software" p.6
The shortcut file may be corrupted. Start EasyMP Multi PC Projection, and then try searching for and
connecting to the projectors again.
s "Starting EasyMP Multi PC Projection"
s "Searching for and Connecting to the Projectors"
Uninstall and then reinstall EasyMP Multi PC Projection.
s "Uninstalling the Software" p.46
s "Installing the Software" p.6
Use a computer that can connect to LAN.
Because the projector is already projecting using EasyMP Multi PC Projection, you cannot start from
the shortcut. Stop projecting and then start from the shortcut.
Remedy
p.15
p.17
38