System Setup Options - Dell OPTIPLEX 3010 Desktop Owner's Manual

Action
Exit BIOS
Change a setting
Select field to change
Cancel modification
Reset defaults

System Setup Options

NOTE: Depending on the computer and its installed devices, the items listed in this section may or may not appear.
Table 1. General
Option
System Information
Boot Sequence
Date/Time
Table 2. System Configuration
Option
Integrated NIC
Description
Displays the following information:
• System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership
Date, Manufacture Date, and the Express Service Code.
• Memory Information: Displays Memory Installed, Memory Available, Memory
Speed, Memory Channels Mode, Memory Technology, DIMM 1 Size, DIMM 2
Size, DIMM 3 Size, and DIMM 4 Size.
• Processor Information: Displays Processor Type, Core Count, Processor ID,
Current Clock Speed, Minimum Clock Speed, Maximum Clock Speed,
Processor L2 Cache, Processor L3 Cache, HT Capable, and 64-Bit Technology.
• PCI Information: Displays SLOT1, SLOT2, SLOT3, SLOT4
• Device Information: Displays SATA-0, SATA-1, SATA-2, SATA-3, and LOM MAC
Address.
Allows you to specify the order in which the computer attempts to find an operating
system from the devices specified in this list.
• USB Storage Device
• CD/DVD/CD-RW Drive
• Onboard NIC
Allows you to set the date and time settings. Changes to the system date and time take
effect immediately.
Description
Allows you to enable or disable the integrated network card. You can set the integrated
NIC to:
• Disabled
• Enabled (default)
• Enabled w/PXE
• Enabled w/ImageServer
Keystroke
<Esc> — Remain in Setup, Save/Exit, Discard/Exit
Left or right-arrow key
<Enter>
<Esc>
<Alt><F> or Load Defaults menu option
35