DICE Silverline iPod Kit Installation Manual page 26

Interface for ipod for selected audi/volkswagen vehicles

Hide thumbs Also See for Silverline iPod Kit:

Table of Contents

5b - Audi/VW radios with "Y-harness" type CAN2 connection -You can access the SAT connector located on the back of

the radio. Unplug the factory connection if present and plug the Audi/VW CAN connector in. Connect the factory plug

to the cable receptacle if it was removed from the radio. The connector should securely lock.The factory SAT tuner

must be disconnected at the tuner which is usually located in the trunk or under the passenger seat.

Audi/VW-CAN connector (type 2)

factory harness

in vehicle

to interface

module

receptacle

Table of Contents

Silverline audi/vw-cdc Silverline audi/vw-sat