Installing The Display Panel - Dell Vostro 330 Service Manual

Back to Contents Page
Dell Vostro 330 Owner's Manual

Installing The Display Panel

1. Route all the cables through their routing slots.
2. Place the display panel on the frame.
3. Replace the screws that secure the display panel to the chassis.
4. Route the IR and Bluetooth cables through their respective routing holes.
5. Press the bezel on to the display till all the tabs snap into place.
6. Replace the web camera.
7. Carefully turn the assembly over.
8. Replace the screws that secure the front bezel to the chassis.
9. Route the IR cable and camera cable thorough their routing slots.
10. Connect the camera cables to the DSP board.
11. Connect the display power cable to the converter.
12. Route the Bluetooth cable through the routing slot.
13. Replace the front bezel.
14. Replace the middle bezel.
15. Replace the processor.
16. Replace the processor heat
17. Replace the processor fan.
18. Replace the video card fan.
19. Replace the video card and heat sink
20. Replace the system board shield.
21. Replace the front stand.
22. Replace the cover.
23. Follow the procedures in After Working Inside Your
Related tasks
Removing the Display Panel
sink.
assembly.
Computer.