Replacing The Power-Button Board - Dell XPS L401X Service Manual

1 screw
3 system-board connector
5 top cover
Replacing the Power-Button Board
1. Follow the instructions in Before You
2. Use the alignment post to place the power-button board on the top cover.
3. Replace the screw that secures the power-button board to the top cover.
4. Connect the power button-board cable to the system-board connector.
5. Connect the display cable to the system-board connector.
6. Replace the keyboard (see
7. Replace the palm-rest assembly (see
8. Follow the instructions from
9. Replace the hard drive (see
10. Replace the memory module(s) (see
11. Replace the battery (see Replacing the
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
2 power-button board
4 display cable
Begin.
Replacing the Keyboard).
Replacing the Palm-Rest
step 5 to step 6 in Replacing the Optical
Replacing the Hard Drive).
Replacing the Memory Module(s)).
Battery).
Assembly).
Drive.