Dell OptiPlex GX1 Low-Profile Managed PC Systems Reference And Installation Manual page 57

Working Inside Your Computer: Dell OptiPlex GX1 Low-Profile Managed PC Systems
Table 1. System-Board Jumper Settings
Jumper Setting
PSWD
BIOS
BUS66M
266MHZ*
300MHZ*
333MHZ*
350MHZ*
400MHZ*
450MHZ*
500MHZ*
* The correct microprocessor speed is automatically detected and set by the system. Do not change the
settings of these jumpers.
The system can operate with a microprocessor speed up to 600 megahertz (MHz).
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in your online
System User's Guide.
jumpered
file:///C|/infodev/2013/eDoc/OpGX1/SQRG/computer.htm[2/21/2013 11:53:01 AM]
Description
Password features are enabled.
Password features are disabled.
Reserved (do not change).
Reserved (do not change).
Reserved (do not change).
Reserved (do not change).
Reserved (do not change).
Reserved (do not change).
Reserved (do not change).
Reserved (do not change).
Reserved (do not change).
unjumpered