Table of Contents
Advertisement
Chapter 5 - Command Line Management
SubnetMask, and IPBroadcast keywords in the IP
Ethernet 0 (and/or Ethernet 1) section.
B. Use the save command to save the changes to the device's
Flash ROM.
•
You may also use CompatiView from a reconfigured IP host
(if using the IP transport protocol), or anywhere on your net-
work (if using the IPX transport protocol). Instructions for
these two methods are given in Chapter 4 - CompatiView
Software Installation.
•
With CompatiView, basic IP parameters can be set using the
TCP/IP Routing: Ethernet 0 Dialog Box. Use the Save
to/Device option under the File menu to save the changes.
After you have set these IP parameters and saved the changes, you can
use Telnet to access the router from any node on your IP network.
Invoke the Telnet client on your local host with the IP address of the
router you wish to manage.
17
Advertisement
Table of Contents
Need help?
Do you have a question about the MicroRouter 2270R and is the answer not in the manual?
Questions and answers