Section Two: Maintenance And Warranty; Maintenance - Teleflex TFX100ID Operation Manual

MAINTENANCE AND WARRANTY

MAINTENANCE

MAINTENANCE
Your Teleflex 100ID depthsounder is designed to provide you with years of
trouble-free operation with virtually no maintenance. Follow the simple
procedures below to ensure that your 100ID continues to deliver top perfor-
mance.
If the unit comes into contact with salt spray, simply wipe the affected
surfaces with a cloth dampened in fresh water.
When cleaning the LCD protective lens, use a chamois and non-abrasive,
mild cleaner. Do not wipe while dirt or grease is on the lens. Be careful to
avoid scratching the lens.
If your boat remains in the water for long periods of time, algae and other
marine growth can reduce the effectiveness of an externally mounted trans-
ducer. Periodically clean the face of the transducer with liquid detergent.
Pivoting the transducer up in the bracket may allow better access for inspec-
tion or cleaning.
If your boat remains out of the water for a long period of time, it may take
some time to wet the transducer when returned to the water. Small air
bubbles can cling to the surface of the transducer and interfere with proper
operation. These bubbles will dissipate with time, or you may wipe the face
of the transducer with your fingers after the transducer is in the water.
Do not attempt to repair the 100ID yourself. There are no user serviceable parts
inside, and special tools and techniques are required for reassembly to ensure
the integrity of the housing. Repairs should be performed only by autho-
rized Techsonic technicians.
18