Customise Quick Menu; Traffic Settings - Clarion NX501A Owner's Manual

4.3.2 Customise Quick menu

The content of the Quick menu (page 20) is fully customisable. Tap the button you want to
change, and select its new function from the list.
The list of available functions and their descriptions are on page 20.

4.3.3 Traffic settings

The recommended route is not always the same between two points. Whenever suitable data
exists, traffic information can be taken into account in the route calculation.
Button
The application can warn you when you approach road safety
cameras like speed cameras or dangerous areas like school
zones or railroad crossings. Tap this button and set the different
alert types individually. The following alert types are available:
Audio warning: beeps or the name of the alert type can be played
while you are approaching the camera, or extra alert sounds if you
exceed the speed limit while approaching one of these cameras.
Visual warning: the type of the alert point, its distance and the
related speed limit appear on the Map screen while you are
approaching one of these cameras. The distance from the camera
is also displayed. For some of the alert points, the enforced or
expected speed limit is available. For these points, the audio alert
can be different if you are below or above the given speed limit.
Only when speeding: The audio alert is only played when you
exceed the given speed limit. When approaching: The audio alert
is always played. In order to draw your attention, the alert can be
different if you exceed the speed limit. Road safety cameras are
not displayed in the list when GPS position is not available or if
you are in certain countries where road safety camera warning is
prohibited.
Maps may contain driver alert information. Tap this button to turn
on or off these warnings and to set the distance from the hazard
to receive the warning at. These can be set individually for the
different warning types.
Use this switch to enable or disable the TMC receiver that can receive
real-time traffic information. The rest of the buttons below are all
related to the TMC function and are available only if the receiver is
enabled.
This setting determines how Clarion Mobile Map uses the received
real-time traffic information in route calculation. When calculating a
new route, or when recalculation becomes necessary based on the
received Traffic events, Clarion Mobile Map avoids traffic events if it
makes sense.
You can also set the minimum delay that triggers route recalculation,
and you can instruct the application if you want to confirm every
recalculation.
Description
NX501A English 75