Dell Inspiron 510M Service Manual page 44

Hide thumbs Also See for Inspiron 510M:

Table of Contents

Microprocessor Module: Dell Inspiron 510m Service Manual

NOTICE:

You must position the microprocessor module correctly in the ZIF socket to avoid

permanent damage to the module and the socket.

When the microprocessor module is correctly seated, all four corners are aligned at the same

height. If one or more corners of the module are higher than the others, the module is not seated

correctly.

2. Tighten the ZIF socket by turning the cam screw clockwise to secure the microprocessor module

to the system board.

3. Replace the other computer parts you removed earlier in this procedure.

4. Update the BIOS using a flash BIOS update program floppy disk or CD. For instructions on how

to flash the BIOS, see

Back to Contents Page

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...S_checked%20ok/Inspiron/510M/510M%20SM/cpu.htm (3 of 3)6/21/2004 12:34:54 AM

"Flashing the

BIOS."

Table of Contents