Installing The Display Panel - Dell Inspiron 5100 Service Manual

Display: Dell Inspiron 1100, 5100, and 5150 Service Manual
2 pull-tab
3 top flex-cable connector
8. Disconnect the bottom flex-cable connector from the inverter connector on the system board by
peeling up the pull-tab and pulling the tab down and away from the inverter connector.
1 inverter connector
2 bottom flex-cable connector
3 pull-tab

Installing the Display Panel

1. Connect the top flex-cable connector to the display panel connector.
2. Connect the bottom flex-cable connector to the inverter connector.
3. Lay the display panel in the top cover.
4. Route the display-feed flex cable so that it rests in the notch located in the bottom edge of the top
cover.
5. Replace the eight M2 x 3-mm screws that secure the display panel to the top cover.
6. Replace the display
Display Latch Assembly
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/L...00%205150/1100%205100%205150%20SM/display.htm (6 of 8)6/21/2004 12:38:35 AM
bezel.