Inserting An Sd Card And Usb Memory - 3M Digital Projector X64w Safety Manual

Inserting an SD Card and USB Memory

Using a USB storage
In order to view images stored in a USB storage, such as a USB memory, insert the device into the USB
STORAGE slot.Before removing the USB storage, be sure to perform the REMOVE MEDIA procedure
using the PC-LESS PRESENTATION menu under the MIU menu.
Using an SD card
In order to view images stored in an SD storage, such as
an SD memory card, insert the device into the SD card
slot. Or, in order to use the wireless network function,
load the internal clock battery and insert the designated
wireless network card into the SD card slot.
Inserting the SD card
1. Make sure that the power code is not plugged into
the projector for the wireless network card only.
2. Remove the SD card slot cover. To remove it, it might be recommended to hook the edge of its
side face upward.
3. Slowly insert the SD card completely into the SD card slot. Make sure that the angled corner of
the SD card is placed into the right side of the SD card slot, while inserting.
4. Replace the SD card slot cover. It is recommended that the cover is slid sideways to the
projector.
Using the slot cover lock for security
Using the enclosed slot cover lock can prevent the SD card slot cover from being opened.
1. Open the two plates of the slot cover lock to put the tips of two plates together, and then insert
the tips to the lock hole of the SD card slot cover.
2. Put the body of the two plates together. Then, hook a padlock or combination lock to the hole
of the slot cover lock.
Removing the SD card
1. Perform the REMOVE MEDIA procedure using the PC-LESS PRESENTATION menu under
the MIU menu for SD Storage card only.
2. Turn the projector off and unplug the power code from the projector for the wireless network
card only.
3. Remove the SD card slot cover. After taking the SD card away, replace the SD card slot cover.
• Do not disassemble or modify the projector and accessories.
• Do not touch the SD card while being accessed.
• The designated wireless network card is required to use the wireless network function
of this projector.
• The wireless network card is not permitted to be sold or used in some countries
and regions. Use the card only in the country or region where you buy it. For more
information, contact to your dealer.
When using the projector with a wired LAN, please remove the wireless network card.
© 3M 2008
WARNING
CAUTION
Note
3M™ Digital Projector X64w Product Safety Guide
SD card slot cover
SD CARD SD CARD
Slot cover lock
15