Download Print this page
3M Digital Projector X64 Operator's Manual
3M Digital Projector X64 Operator's Manual

3M Digital Projector X64 Operator's Manual

Technical
Hide thumbs Also See for Digital Projector X64:

Advertisement

Quick Links

X64
Operator's Guide
Example of PC signal
Resolution (H x V) H. frequency (kHz) V. frequency (Hz)
720 x 400
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 960
1280 x 1024
1280 x 1024
1280 x 1024
1600 x 1200
1280 x 768
1400 x 1050
NOTE
• Be sure to check jack type, signal level, timing and resolution
before connecting this projector to a PC.
• Some PCs may have multiple display screen modes. Use of some of these
modes will not be possible with this projector.
• Depending on the input signal, full-size display may not be possible in some
cases. Refer to the number of display pixels above.
• Although the projector can display signals with resolution up to UXGA
(1600x1200), the signal will be converted to the projector's panel resolution
before being displayed. The best display performance will be achieved if the
resolutions of the input signal and projector panel are identical.
• Automatically adjustment may not function correctly with some input signals.
• The image may not be displayed correctly when the input sync signal is a
composite sync or a sync on G.
TECHNICAL
37.9
31.5
37.9
37.5
43.3
35.2
37.9
48.1
46.9
53.7
49.7
48.4
56.5
60.0
68.7
67.5
60.0
64.0
80.0
91.1
75.0
47.7
65.2
© 3M 2007. All Rights Reserved.
Rating
85.0
VESA
59.9
VESA
72.8
VESA
75.0
VESA
85.0
VESA
56.3
VESA
60.3
VESA
72.2
VESA
75.0
VESA
85.1
VESA
74.5
60.0
VESA
70.1
VESA
75.0
VESA
85.0
VESA
75.0
VESA
60.0
VESA
60.0
VESA
75.0
VESA
85.0
VESA
60.0
VESA
60.0
VESA
60.0
VESA
Signal mode
TEXT
VGA (60Hz)
VGA (72Hz)
VGA (75Hz)
VGA (85Hz)
SVGA (56Hz)
SVGA (60Hz)
SVGA (72Hz)
SVGA (75Hz)
SVGA (85Hz)
Mac 16" mode
XGA (60Hz)
XGA (70Hz)
XGA (75Hz)
XGA (85Hz)
1152 x 864 (75Hz)
1280 x 960 (60Hz)
SXGA (60Hz)
SXGA (75Hz)
SXGA (85Hz)
UXGA (60Hz)
W-XGA (60Hz)
SXGA+ (60Hz)
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Digital Projector X64 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for 3M Digital Projector X64

  • Page 1 • Automatically adjustment may not function correctly with some input signals. • The image may not be displayed correctly when the input sync signal is a composite sync or a sync on G. © 3M 2007. All Rights Reserved.
  • Page 2 11.9 (60Hz) (60Hz) SXGA (60Hz) 11.9 SXGA(60Hz) 1024 SXGA (75Hz) SXGA (75Hz) 1024 SXGA (85Hz) SXGA (85Hz) 1024 UXGA (60Hz) UXGA (60Hz) 1200 W-XGA (60Hz) 16.0 W-XGA (60Hz) SXGA+ (60Hz) 11.4 SXGA+ (60Hz) 1050 © 3M 2007. All Rights Reserved.
  • Page 3 A : SDA (DDC data) C : (No connection) (No connection) Ground 13 H. sync / Composite sync. Ground Red 14 V. sync. Ground Green A : SCL (DDC clock) C : (No connection) Ground Blue (No connection) © 3M 2007. All Rights Reserved.
  • Page 4 Pb/Cb, Pr/Cr RCA jack x3 • System: 525i(480i), 525p(480p), 625i(576i), 750p(720p),1125i(1080i) Port Signal Pb/Cb Pr/Cr S-VIDEO Mini DIN 4pin jack Signal Ground Ground VIDEO RCA jack • System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43 © 3M 2007. All Rights Reserved.
  • Page 5 (jack) RCA plugs SCART cable (plug) To input SCART RGB signal to the projector, use a SCART to RCA cable. Connect the plugs refer to above ex.. For more reference, please consult your dealer. © 3M 2007. All Rights Reserved.
  • Page 6 3 + Data 4 Ground CONTROL D-sub 9pin plug • About the details of RS-232C communication, please refer to the following page. Signal Signal Signal (No connection) (No connection) Ground (No connection) (No connection) © 3M 2007. All Rights Reserved.
  • Page 7: Communications Setting

    Action (byte_0 - 1) Action Content Change setting to desired value. Read projector internal setup value. Increment Increment setup value by 1. Decrement Decrement setup value by 1. Execute Run a command. © 3M 2007. All Rights Reserved.
  • Page 8 • Provide an interval of at least 40ms between the response code and any other code. • The projector outputs test data when the power supply is switched ON, and when the lamp is lit. Ignore this data. • Commands are not accepted during warm-up. © 3M 2007. All Rights Reserved.
  • Page 9 A1 30 25 00 #6 CUSTOM BE EF 06 00 57 FE 01 00 A1 30 15 00 BE EF 06 00 F4 F0 02 00 A1 30 00 00 (continued on next page) © 3M 2007. All Rights Reserved.
  • Page 10 B2 30 00 00 Increment BE EF 06 00 16 F4 04 00 B2 30 00 00 Decrement BE EF 06 00 C7 F5 05 00 B2 30 00 00 (continued on next page) © 3M 2007. All Rights Reserved.
  • Page 11 01 00 08 20 02 00 NORMAL BE EF 06 00 5E DD 01 00 08 20 10 00 BE EF 06 00 AD D0 02 00 08 20 00 00 (continued on next page) © 3M 2007. All Rights Reserved.
  • Page 12 14 30 00 00 TURN ON BE EF 06 00 5B D7 01 00 14 30 01 00 BE EF 06 00 F8 D6 02 00 14 30 00 00 (continued on next page) © 3M 2007. All Rights Reserved.
  • Page 13 1C 20 01 00 TURN OFF BE EF 06 00 6E D5 01 00 1C 20 00 00 BE EF 06 00 5D D5 02 00 1C 20 00 00 (continued on next page) © 3M 2007. All Rights Reserved.
  • Page 14 01 00 31 26 00 00 HIGH BE EF 06 00 93 3D 01 00 31 26 01 00 BE EF 06 00 30 3C 02 00 31 26 00 00 (continued on next page) © 3M 2007. All Rights Reserved.
  • Page 15 16 20 00 00 TURN ON BE EF 06 00 26 D7 01 00 16 20 01 00 BE EF 06 00 85 D6 02 00 16 20 00 00 (continued on next page) © 3M 2007. All Rights Reserved.
  • Page 16 06 00 83 D2 01 00 02 30 00 00 FREEZE BE EF 06 00 13 D3 01 00 02 30 01 00 BE EF 06 00 B0 D2 02 00 02 30 00 00 © 3M 2007. All Rights Reserved.