Page 1
Digital Projector Product Safety Guide X64 Projecteur numérique - Guide de Sécurité de Produit X64 Digitalprojektor - Sicherheitsanleitung des Geräts X64 Proyector digital - Guiá de Seguridad del Producto X64 Proiettore digitale - Guida di Sicurezza del Prodotto X64 Digitale Projector - Veiligheidsgids op Product X64 Projector Digital - Guia da Segurança de Produto X64 Digital projektor- Bruksanvisning för Produktsäkerhets X64 Digitaalinen projektori - Laitteen turvaohjeet...
Retain these instructions for future reference. Intended Use The 3M™ Multimedia Projector X64 was designed, built and tested for use indoors, using 3M brand lamps, 3M brand ceiling mount hardware and nominal local voltages. This projector is not intended for household use or use by children.
Page 6
Do not modify this projector. Do not attempt to service the projector - there are no user serviceable parts, other than the lamp cartridge, inside the projector. Contact a 3M authorized service provider for service. Do not allow water or other liquids to enter the projector.
Page 7
• To reduce the risk associated with the impact of a falling projector: Use only the 3M™ brand wall/ceiling mounting hardware kit if wall or ceiling mounting is desired. Adhere strictly to the proper installation procedure as outlined in the installation instructions when installing the 3M™...
For recycling and disposal information, contact your respective governmental agencies. In U.S., contact 1-800-328-1371 (3M US) or the Electronic Industries Alliance at www.lamprecycle.org In Canada, contact 1-800-364-3577 (3M Canada)
Disconnect power cord when the projector is not in use, during lamp replacement, and while cleaning. Do not attempt to service the projector - there are no user serviceable parts, other than the lamp cartridge, inside the projector. Contact a 3M authorized service provider for service. •...
Page 12
4. Insert lamp module: Carefully insert (4) the new lamp module. Ensure that it is fully seated. Tighten the lamp module retaining screws (3) to secure the lamp module in place. Optional Lamp: 78-6969-9917-2 (Contact 3M Customer Service.) Note Reset the lamp operation hours. See “Reset Lamp Hours” for details.
• The ambient operating environment should be free of airborne smoke, grease, oil and other contaminates that can effect the operation or performance of the projector. (d) The warranty will be void if you repair or modify the 3M Digital Projector or you otherwise damaged the product due to misuse, neglect, mishandling or other abuse.
Need help?
Do you have a question about the X64 and is the answer not in the manual?
Questions and answers