Aux Operations; Trouble Shooting - Clarion CZ102A Owner's Manual

CD/MP3/WMA Operations
Folder Select
This function allows you to select a folder
containing MP3/WMA files and start playing
from the first track in the folder.
1. Press the [ 5 ] or [ 6 ] button.
Press the [ 6 ] button to move the next
folder. Press the [ 5 ] button to move the
previous folder.
2. To select a track, press the [ ] or [
button.
Search Function
1. Press the [MENU] button to enter FOLD
SCH mode. Press the [VOLUME] button to
enter the folder list search mode.
2. Turn the [VOLUME] knob to select a folder.
3. Press the [VOLUME] button to enter the file
list search mode. And then the track list
appears in the display.
4. Turn the [VOLUME] knob to select a track.
5. Press the [VOLUME] knob to play.
* When play back MP3 / WMA file, this
function is performed in the current folder.
Top function
The top function resets the CD player to the first
track of the disc. Press and hold the [ 4 ] button
(1 sec.) to play the first track (track No. 1) on the
disc.
* In case of MP3/WMA, the first track of the
current folder will be played.

AUX Operations

Press [SRC / ] button on the panel or remote
control to select "AUX".
AUX is just for audio content with 3.5mm Jack
connector plugged into audio-in socket on the
front panel.
0 A 0 AR
7
Other various play functions
Scan play
This function allows you to locate and play
the first 10 seconds of all the tracks recorded
on a disc.
Press the [ 1 ] button to perform scan play.
Repeat play
This function allows you to play the current
]
track repeatedly or play a track currently
b e i n g p l a y e d i n t h e M P 3 / W M A f o l d e r
repeatedly.
CD:
1. Press the [ 2 ] button once or more until
"RPT ON" appears on the LCD to perform
repeat play.
2. Press [ 2 ] button repeatedly until "RPT
OFF" appears on the LCD to cancel repeat
playback.
MP3/WMA:
1. Press the [ 2 ] button once or more until
"TRACK RPT" appears on the display to
perform repeat play, and "RPT" segment
lights on.
2. For MP3/WMA files, press [ 2 ] button
repeatedly until "FOLDER RPT" appears
on the display for folder repeat play.
3. Press [ 2 ] button repeatedly until "RPT
OFF" appears on the display to cancel
repeat playback, and "RPT" segment goes
off.
Random play
This function allows you to play all tracks
recorded on a disc in a random order.
Press the [ 3 ] button to perform random play.
AUX Input sensitivity setting
1. Press and hold the [DISP] button (1 sec.).
2. Turn the [VOLUME] knob to select "AUX
SENS".
3. If the output level of connected external
audio player is "HIGH", rotate [VOLUME]
knob and choose "LOW". And if the output
level is "LOW", choose "HIGH".

6. TROUBLE SHOOTING

GENERAL
Problem Cause
Unit fuse blown.
Unit can not
power on.
Car battery fuse blown.
Unit can not
power on.
Nothing happens
The microprocessor has
when buttons are
malfunctioned due to noise, etc.
pressed.
Display is not
accurate.
Battery depleted.
Remote control
does not work.
Battery installed incorrectly.
Improper audio output connection. Check wiring and correct.
Volume set too low.
No/low audio Speakers damaged.
output.
Heavily biased volume balance.
Speaker wiring is in contact with
metal part of car.
Non-standard disc used.
Speaker power rating does not
Poor sound quality
match unit.
or distortion.
Wrong connections.
Speaker is shorted.
Tel-Mute
MUTE wire is grounded.
malfunction.
Unit resets itself Incorrect connection between
when engine is off. ACC and Battery.
Measure
Replace with new fuse of correct rating.
Replace with new fuse of correct rating.
Turn off the power and remove the DCP.
Press the [RESET] button with a thin rod.
Note:
When the [RESET] button is pressed, turn off
the ACC power.*
* When the [RESET] button is pressed, preset
radio stations, titles, etc. stored in memory are
cleared.
Change the battery.
Install the battery correctly.
Increase volume level.
Replace speakers.
Adjust the channel balance to center position.
Insulate all speaker wiring connections.
Use a standard disc.
Replace speakers.
Check wiring and correct.
Check wiring and correct.
Check the MUTE wiring and correct.
Check wiring and correct.