Wiring And Connections; Connecting The Accessories - Clarion CZ102A Owner's Manual

7) Wiring and Connections

Antenna
(Black)
Refer to next page
0 A 0 AR
11
Black White
Rear audio output (Left) /
Subwoofer output 1
Red
Black
Rear audio output (Right) /
Subwoofer output 2
2 Channel Amplifier
Gray
Front Right
Gray/Black
White
Front Left
White/Black
Purple
Rear Right
Purple/Black
Green
Rear Left
Green/Black
4-Speaker system
or
2-Speaker system
Gray
Front Right
Gray/Black
White
Front Left
White/Black
Purple
Purple/Black
Green
Not used.
Green/Black
Insulate each wire

8) Connecting the Accessories

• Connecting to the external amplifier
External amplifiers can be connected to the 2 channel RCA output connections.
Ensure that the connectors are not grounded or shorted to prevent damage to the
unit.
16-Pin Connector Extension Lead
(attached to the source unit)
Brown wire (Phone mute lead)
Connect to cellular phone mute lead.
Yellow wire (Memory back-up lead)
Connect directly to battery
FUSE 15A
Red wire (Power lead)
Accessory 12V
Blue/White wire (Amplifier turn-on lead)
Connect to remote turn-on lead of amplifier
Black wire (Ground lead)
Connect to vehicle chassis ground
Orange/White wire (Illumination lead)
Connect it to the car power supply terminal
for illumination
Blue wire (Auto antenna lead)
Connect it to the car power supply terminal
for antenna