Table of Contents
Advertisement
Addendum for Bluetooth® functions
Geosat 5 BLU / Geosat 5 GT
Introduction: Hands Free calls
With Geosat 5 BLU and Geosat 5 GT portable satellite navigators you can perform hands
free calls in your car. Your Mobile phone can communicate with Geosat 5 thanks to the
Bluetooth® technology, so you can manage calls directly from the display of Geosat 5 without
touching your mobile phone. Geosat 5 is equipped with a powerful speaker and microphone
so that you can listen and talk without the need of headphones.
1. Setting the Bluetooth® communication
To set the Bluetooth® communication between your mobile phone and Geosat 5 in
order to perform hands free calls, it is necessary to carry out the pairing procedure
1.
Press the Menu key on the side keyboard to open the Main Menu.
2.
In the first page touch the Mobile Phone button.
3.
Touch the Enable Bluetooth® to activate the Bluetooth® communication (When
this is active the icon changes to Disable Bluetooth®)
4.
Now you have to activate the Bluetooth® communication on your mobile
phone. Then use Geosat 5 to find the devices and start the pairing procedure.
5.
Touch the Search phones button on Geosat 5 display to search for Bluetooth®
devices on the surroundings.
6.
Touch the Search phones button in the upper right corner. The names of the
found devices will appear in the list on the side.
7.
Once the search is over, touch the name of the desired device (the name of your
mobile phone), and touch the Connect button.
8.
Now the message of pairing request from AvMap Geosat 5 will appear on your
mobile phone insert the PIN code: 0000. The communication is now active and
the devices are paired. The Pairing procedure is necessary only this first time, then
Geosat 5 will automatically find and recognize the paired devices.
9.
Close the page touching the cross button in the upper right corner
When in map view, look at the status bar (lower right corner) to know the status of the
Bluetooth® communication. four different modes: Bluetooth® working but no phone
connected, Bluetooth® working connected to a phone, Bluetooth® working connected and
with active phone call, Bluetooth® not working. Touch the status bar to open the Status
Page.
2. The Main MENU
The Menu key
It opens the Main Menu, which consists in four pages with three big buttons each. Change page by
.
.
Advertisement
Table of Contents
