Floppy Disk Drive Problems; Hard Drive Problems; Keyboard Or Mouse Problems; Memory Problems - Fujitsu LifeBook A6025 User Manual

Problem
The Optical Drive Access
indicator on the Status
Indicator Panel blinks at
regular intervals when no
disc is in the tray or the
optical drive is not installed.

Floppy Disk Drive Problems

You cannot access the
optional external floppy
disk drive.

Hard Drive Problems

You cannot access your
hard drive.

Keyboard or Mouse Problems

The built-in keyboard does
not seem to work.
You have installed an
external keyboard or
mouse, and it does not
seem to work.
You have connected an
external keyboard or mouse
and it seems to be locking
up the system.

Memory Problems

Your Power On screen, or
Main menu of the BIOS
setup utility information,
does not show the correct
amount of installed
memory.
Possible Cause
The auto insertion function is
active and is checking to see if
a disc is ready to run.
You tried to write to a write
protected floppy disk.
Floppy disk is not loaded
correctly.
The floppy disk drive may not
be properly installed.
Security is set to protect access
to floppy disk data.
The wrong drive designator
was used by an application
when a bootable disc was used
to start the notebook.
Security is set in the BIOS so
your operating system cannot
be started without a password.
The notebook has gone into
Sleep mode.
Your application has locked
out your keyboard.
Your external device is not
properly installed.
Your operating system soft-
ware is not set up with correct
software driver for that device.
Your operating system soft-
ware is not setup with correct
software driver for that device.
Your system has crashed.
Your memory upgrade module
is not properly installed.
You have a memory failure.
T r o u b l e s h o o t i n g
Possible Solutions
This is normal. However, you may disable this
feature.
Eject the floppy disk and set it to write enable.
(See Preparing a Disk for Use on page 36 for more
information)
Eject floppy disk, check orientation and re-insert.
(See Ejecting a Disk on page 36 for more information)
Remove and reinstall your floppy disk drive.
Verify your password and security settings.
Verify drive designator used by application is in
use by the operating system. When the operating
system is booted from a disc, drive designations
are automatically adjusted.
Verify your password and security settings.
Push the Power/Suspend/Resume button.
Try to use your integrated pointing device to restart
your system.
Reinstall your device. (See Device Ports on page 40 for
more information)
Check your device and operating system
documentation and activate the proper driver.
Check your device and operating system
documentation and activate the proper driver.
Try to restart your notebook.
Remove and reinstall your memory upgrade
module. (See Memory Upgrade Module on page 38
for more information)
Check for Power On Self Test (POST) messages.
(See Power On Self Test Messages on page 53 for more
information)
47