Advertisement
Replacing the Crossfader
• Disconnect from main power supply
• Remove the fader knob.
• Remove the two outer screws.
• Take the fader out and unplug the connection cables.
• Connect the new fader and replace back into mixer.
Technical Specifications - model XDM-3633
Inputs:
Line: 75mV, 27k Ohm • Microphone: 1.5mV, 600 Ohm • Phono: 1.2mV, 47k Ohm
Output:
Line: 9V, peak to peak • Headphones: 5W @ 47 Ohm • Distortion: less than 0.03%
Signal-To-Noise Ratios:
Line: Better than 88dB • Microphone: Better than 78dB • Phono: Better than 83dB
Frequency Response:
Line: 20Hz - 15KHz, ± 0.5dB • Microphone: 20Hz - 20KHz, ± 0.5dB
ChanneI EQ:
Bass / Mid /Treble: -35dB - +12dB
Talkover Attenuation:
Microphone EQ:
Bass: + /-12dB @ 100Hz • Treble: -/+12dB @ 10 kHz
Headphone impedance:
Crossfader: FF-2
Power supply:
AC 115/230V, 50/60Hz switchable
Power Consumption:
Dimensions:
19" W x 10.5" D x 3.5" H / 483 x 264 x 120 mm (6 rack mount spaces)
Weight:
12 lbs. / 6.5 kg
Warranty & Service
The XDM-3633 has a 2-year limited warranty. Mail in warranty card as soon as possible.
For Service, contact your local American DJ® Dealer.
- 15 - -26dB
16 Ohms
12W typical, 15W w/ full headphone output
© American DJ® AUDIO Los Angeles, CA 90058 USA
Specifications subject to change without notice.
XDM-3633 User Instructions page 8
American DJ® AUDIO
4295 Charter Street
Los Angeles, CA 90058 USA
www.americandj.com
Advertisement
