Trailer Brake Control Panel; Trailer Brake Dic Display Page - GMC 2012 Yukon/Yukon XL Owner's Manual

When trailering, make sure of the
following:
The ITBC system is used only
with trailers that are equipped
with electric brakes.
All applicable local and federal
laws and regulations are
followed.
All electrical and mechanical
connections to the trailer are
made correctly.
The trailer s brakes are in proper
working condition.
The trailer and vehicle are
properly loaded for the towing
condition.
The ITBC system is a factory
installed item. Out of factory
installation of this system should not
be attempted. GM is not responsible
for warranty or performance of the
system resulting from out of factory
installation.

Trailer Brake Control Panel

A. Manual Trailer Brake Apply
Lever
B. Trailer Gain Adjustment Buttons
The ITBC system has a control
panel located on the instrument
panel to the left of the steering
column. The control panel allows
adjustment to the amount of output,
referred to as trailer gain, available
to the electric trailer brakes and
Driving and Operating
allows manual application the trailer
brakes. The Trailer Brake Control
Panel is used along with the Trailer
Brake Display Page on the DIC to
adjust and display power output to
the trailer brakes.

Trailer Brake DIC Display Page

The ITBC system displays
messages into the vehicle s Driver
Information Center (DIC). See
for more information.
The display page indicates Trailer
Gain setting, power output to the
electric trailer brakes, trailer
connection and system operational
status.
The Trailer Brake Display Page can
be displayed by performing any of
the following actions:
Scrolling through the DIC menu
pages using the odometer trip
stem or the DIC Vehicle
Information button (if equipped).
9-81