Liftgate; Windows; Liftglass - GMC 2012 Yukon/Yukon XL Owner's Manual

Press on the Remote Keyless
Entry (RKE) transmitter or use the
power door lock switches to unlock
the liftgate.
There are several ways to open and
close the power liftgate:
Press and hold
transmitter until the liftgate starts
moving.
Press
console inside the vehicle.
Press the touch pad switch on
the underside of the liftgate
handle (B).
Press
liftgate next to the latch to close.
To disable the power liftgate
function, press OFF on the
overhead console.
There are two ways to unlatch the

liftglass:

Press the button on the
underside of the license plate
applique (A).
Press
transmitter.
See Liftgate (Manual) on page 2 9
on the RKE
or Liftgate (Power) on page 2 10.
on the overhead
on the bottom of the
on the RKE
The power window controls are
located on each of the side doors.
The driver door also has switches
that control the front passenger and
rear windows. The power windows
work when the ignition is in ON/
RUN or ACC/ACCESSORY, or in
Retained Accessory Power (RAP).
See Retained Accessory Power
(RAP) on page 9 27.
Press the switch to lower the
window. Pull the switch up to
raise it.