Standby Mode - Fujitsu Siemens Computers AMILO Pro V2035 Easy Manual

Using the power-management features

Standby mode

► Press the ON/OFF switch to switch the standby mode on and off.
You can configure the ON/OFF switch under Start - (Settings) - Control Panel - Power Options
i
- Advanced.
In the Standby/Suspend-to-DRAM mode the content of your main memory is saved by continuing to
supply the main memory with power, while the processor, monitor, hard disk and other internal
components are switched off. This mode is activated each time you press the ON/OFF switch.
Saving is also triggered when you do not make an entry on your notebook for a certain time. When
you resume work, your notebook returns to the place at which you discontinued working.
If you use an integrated LAN/Modem, a PC-LAN card or a PC modem card, we do not
i
recommend switching over to the Standby mode, as this may lead to an interruption in the
network connection.
When you press the ON/OFF switch for more than 4 seconds, you switch off your
notebook.
58 A26391-K183-Z121-1-7619, edition 1