Connecting The Mains Adapter - Fujitsu Siemens Computers AMILO Pro V2035 Easy Manual

Connecting the mains adapter

Please take note of the information in the section "Selecting a location".
!
The power cable supplied conforms to the requirements of the country in which you
purchased your notebook. Make sure that the power cable is approved for use in the
country in which you intend to use it.
The mains adapter's AC cable should only be connected to a mains socket if the notebook
is connected to the mains adapter.
Do not use the mains adapter for other notebooks or devices.
Do not use a mains adapter that is not specially intended for this notebook.
Make sure that the rated current of the mains adapter is not higher than that of the power
system to which you connect the mains adapter (see technical data of the mains adapter).
As an example the image shows the AMILO Pro V2030. The position of the connections
i
on other models may be found under "Ports and operating elements".
► Connect the mains adapter cable to the DC jack (DC IN) of the notebook (1).
► Connect the power cable to the mains adapter (2).
► Plug the power cable into a mains outlet (3).
A26391-K183-Z121-1-7619, edition 1
Preparing the notebook for use
1
2
3
13