Technical Data; Vesa-Ddc-Compatible Vga Interface - Fujitsu Siemens Computers 21P4 Owner's Manual

Colour monitor 21P4

Technical data

Dimensions and weight
CRT:
Visible diagonals:
Dot pitch:
Maximal resolution:
Dimensions (W x H x D):
Weight:
Accessories:
Storable display modes:
Electrical data
Video:
Synchronisation:
Horizontal frequency:
Refresh rate:
Maximum pixel rate:
Power supply:
Power consumption (see power
management):
Environmental conditions
Environment class 3K2, IEC 721
Rated range of operation:
Humidity:
Limit range of operation:
Humidity:
Condensation must be avoided.

VESA-DDC-compatible VGA interface

Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications interface
between the monitor and the computer. If your computer is equipped with a VESA-DDC-compatible
VGA interface, it can automatically read the data for ensuring optimum operation from your monitor
and select the appropriate settings.
If the monitor 21P4 is not yet displayed in the list of monitors, you can select one of the
i
following monitors instead:
Fujitsu Siemens, Siemens or Siemens Nixdorf 21P3, 21T1, MCM 2110, MCM 2111
20 - English
53 cm (21")
50 cm
0.26 mm
1920 x 1440 pixels
504 mm x 506 mm x 482 mm
25.7 kg
Power cable (1.8 m), Data cable (1.8 m)
18 (8 of which are preset)
analogue, positive, 0.7 V pp , 75 Ohm
TTL
30 kHz .... 115 kHz (multi-scanning)
50 Hz .... 160 Hz
320 MHz
100 V - 240 V 10%, 60 Hz/50 Hz
< 120 W (ON, Normal mode)
< 3 W (OFF mode)
10 °C .... 40 °C
10 % .... 80 %
0 °C .... 60 °C
5 % .... 90 %
3 Hz, < 2 A
A26361-K886-Z100-1-5E19