Download Print this page

Fujitsu FBR12 Specification Sheet

Fbr12 series miniature relay 2 poles—1 to 2 a (for signal switching).
Hide thumbs
   

Advertisement

MINIATURE RELAY
2 POLES—1 to 2 A (FOR SIGNAL SWITCHING)
FBR12 SERIES
FEATURES
Super miniature size: 0.2 inch
Up to 50% less volume and board area than previous
generation telecom relay.
Slim type for high density mounting
Conforms to Bellcore TR-NWT-001089 and FCC Part 68
requirements
UL recognized and CSA certified
Low power consumption
Conforms to IEC 950 (W type only)
– 2.5 mm clearance and creepage between coil and contacts
–5000 V surge strength between coil and contacts (2x10 s
surge wave)
–2000 Vrms dielectric strength between coil and contacts
–UL 1950 and IEC950 (approval in process)
ORDERING INFORMATION
FBR12 N
[Example]
(a)
(b)
(a)
Series Name
(b)
Enclosure & Coil Power
(c)
Coil Type
(d)
Nominal Voltage
(e)
Contact Material
(f)
Custom Designation
(g)
CSA Standard
Note: The designation name is stamped on the top of the relay case as follows:
(Example) Designation ordered: FBR12ND05
SAFETY STANDARD AND FILE NUMBERS
UL508, 1950, 114 (File No. E63615)
C22.2 No. 0, No. 14 (File No. LR40304 or LR64026)
Nominal coil voltage
3 to 24 VDC
0.1 inch grid, 12 pin DIP
–** (–CSA)
D
12
–P
(c)
(d) (e)
(f )
(g)
FBR12 : FBR12 Series
N
: Standard (plastic sealed type)
W
: High dielectric strength type (plastic sealed type)
H
: High sensitivity type
D
: DC coil
Refer to the COIL DATA CHART
Nil
: Gold-overlay silver-nickel
–P
: Gold-overlay silver-palladium
To be assigned custom specification
–CSA
: UL114 + CSA recognized
–CSA
: UL1950 + CSA (under application)
Stamp: 12ND05
Contact rating
0.5 A 125 VDC resistive
2
A 30 VDC resistive
0.3 A 110 VAC
resistive
1

Advertisement

   Related Manuals for Fujitsu FBR12

   Summary of Contents for Fujitsu FBR12

  • Page 1

    A 30 VDC resistive 0.3 A 110 VAC –** (–CSA) –P (f ) FBR12 : FBR12 Series : Standard (plastic sealed type) : High dielectric strength type (plastic sealed type) : High sensitivity type : DC coil Refer to the COIL DATA CHART : Gold-overlay silver-nickel –P...

  • Page 2: Specifications

    10 to 55 Hz (double amplitude of 3.3 mm) 10 to 55 Hz (double amplitude of 5.0 mm) 500 m/s 1,000 m/s Approx. 1.5 g Approx. 1.9 g FBR12 SERIES -P type (Gold-overlay silver-palladium) Standard High dielectric strength type Gold-overlay silver-palladium...

  • Page 3

    10 to 55 Hz (double amplitude of 3.3` mm) 10 to 55 Hz (double amplitude of 5.0 mm) 500 m/s 1,000 m/s Approx. 1.9 g FBR12 SERIES -P type (Gold-overlay silver-palladium) Gold-overlay silver-palladium operations minimum operations minimum...

  • Page 4

    Must Must resistance operate release ( 10%) voltage* voltage* 80% max. 10% min. of nominal of nominal voltage voltage 1,620 2,880 FBR12 SERIES Coil Nominal Operate temperature power power rise Approx. Approx. Approx. 0.14 W 20 deg 0.08 W (at nominal Max.

  • Page 5

    Distribution of contact resistance Operate Release Time (ms) Schematics (BOTTOM VIEW) SHOW ONE OUT OF THBSB 3 DIMENSIONS (See NA) FBR12 SERIES Life curve 30 V DC resistive load (–P)TYPE 125 V AC resistive load (–P)TYPE Contact load current (A)

  • Page 6

    Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com © 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 09/2001 FBR12 SERIES Europe Fujitsu Components Europe B.V.

This manual also for:

Fbr12nd03 Fbr12nd04 Fbr12nd05 Fbr12nd06 Fbr12nd09 Fbr12nd12... Show all

Comments to this Manuals

Symbols: 0
Latest comments: