Table of Contents
Advertisement
Example: <PlanningMetadata ...
version="1.00">
load="true"
sp
sp sp
For details on the planning metadata, refer to the
Operation Manual supplied with the camcorder.
Using Live Logging Functions
The Live Logging function allows you to transfer
proxy AV data to a computer as you are shooting,
or to send and receive metadata between this
camcorder and a computer.
The following operations are available on the
computer.
• View proxy AV data
• Add and edit metadata (titles, comments,
essence marks, and so on)
• Create clip lists
After adding or editing metadata, or creating a
clip list, you can transfer the metadata or clip list
from the computer back to this unit for recording
on the original disc.
There are two Live Logging operating modes.
Live mode: You can exchange metadata between
the computer and camcorder during
shooting.
View mode: You can send proxy data from the
camcorder to the computer, and exchange
metadata between them during shooting in
Picture Cash mode. (P. Cache Rec Time is
fixed to [0-2sec].)
In UDF mode, you can select the mode with
OPERATION >Rec Function >Live Logging in
the setup menu. In FAT mode, the operation
mode is fixed to live mode.
Note
When one of Frame Rec, Interval Rec, and Clip
Continuous Rec modes is selected, view mode cannot be
selected.
sp
Recording External Input
(Pool Feed)
When you install the optional CBK-HD02 SDI/
COMPOSITE Input and 50 Pin Interface in this
camcorder, you can output and record input
consisting of SDI and composite signals.
To output and record input signals instead of the
camera picture, set Operation >Input/Output
>Source Select in the setup menu to [External].
You can use Operation >Input/Output > Ext
Video Source in the setup menu to select HDSDI
signals (HD-SDI), SDSDI signals (SD-SDI) or
composite signals (Composite) as intput signals.
Use the SDI IN (OPTION) connector to input
HDSDI/SDSDI signals, and the GENLOCK IN
connector to input composite signals.
When you input SDSI signals, you can change the
settings of Down Converter, Wide Mode(Ext),
and Wide ID to select the signal conversion mode
and the method used to handle wide picture
information. When you input composite signals,
you can use Setup Remove(Ext) to select whether
to remove setup.
When i.LINK I/O is set to [Enable], you can
simultaneously output HDV/DV signals from the
i.LINK(HDV/DV) connector.
Notes
• External input signals cannot be recorded in Frame
Rec, Interval Rec, or Slow & Quick Motion mode.
When the selected recording mode is any of Frame
Rec, Interval Rec, or Slow & Quick Motion mode, that
recording mode is cancelled when you set Operation
>Input/Output >Source Select in the setup menu to
[External].
• External signals cannot be displayed with the Freeze
Mix function. Freeze Mix display of the camera picture
is cancelled when you set Operation >Input/Output
>Source Select in the setup menu to [External].
• Execution of automatic adjustment functions such as
automatic black balance and operations such as
playback, Rec Review, and thumbnail display ends
when set Operation >Input/Output >Source Select in
the setup menu to [External]. The camcorder enters
stop mode and then the camera picture switches to
external input.
Recording External Input (Pool Feed)
23
Advertisement
Table of Contents
