Formatting The Phu-60K/120K/120R - Sony PMW-320K Supplement Manual

1
Secure the auxiliary shoe to the
accessory fitting shoe with the four
screws.
Auxiliary shoe
2
Fit the bottom plate (spring type) into
the auxiliary shoe.
Slits for screw holes
Insert the bottom plate from the end where
the slits for the screw holes of the auxiliary
shoe are not open.
If you secure the auxiliary shoe in the
direction opposite that shown in the above
figure with the slit open end forward, insert
the bottom plate from the direction opposite
to that shown in the figure.
3
Attach the shoe adapter (supplied with
the PHU-60K/120K/120R) to the hard
disk unit, mount the unit to the
auxiliary shoe on the camcorder, and
secure it with the lock lever of the shoe
adapter.
For details, refer to the Operating Instructions
of the PHU-60K/120K/120R.
4 Using a External Hard Disk
To connect the PHU connection cable
1
Open the cover of the card slot block
and insert the PHU connection cable
into a slot.
Accessory
fitting shoe
2
Turn on the PHU-60K/120K/120R.
The POWER indicator of the PHU-60K/
Bottom plate
120K/120R lights in green.
Subsequently, the ACCESS lamp of the
camcorder lights in orange then changes to
green once the unit is ready for use.
Notes
• The cover of the card slot block cannot be closed with
the PHU-60K/120K/120R connected.
• Bundle the cable so that it will not accidentally become
entangled with nearby objects.
To disconnect the PHU connection cable
Operate in the same manner as when you remove
an SxS memory card from the slot.
Formatting the PHU-60K/120K/
120R
To format a PHU-60K/120K/120R when
you connect it
When you connect an unformatted PHU-60K/
120K/120R, or connect a PHU-60K/120K/120R
that is formatted to different specifications, or
power the camcorder on with an unformatted
PHU-60K/120K/120R connected, or exit mass
storage mode with an unformatted PHU-60K/
120K/120R connected, a message appears on the
viewfinder screen asking if you want to format
the device.
Insert so that the cable extends upward.