Camera Control Window; To Connect A Camera; To Transmit The Data To The Connected Camera - Sony F35 User Manual

Camera Control Window

The Camera Control window permits you to transmit a
gamma to a camera connected via Ethernet or a group of
gammas as a user gamma file.
The names of the gammas loaded in a camera are
displayed, permitting you to change the current gamma
selection on the camera.
a Connect button and indicator
Click on the button to connect or disconnect
communication with a camera. When connection is
established, the indicator changes color from red to green.
b Send button and radio buttons for selecting gamma
number on camera
To send the gamma selected in the User Gamma window
(page 11) to a camera as the user gamma of the number
specified with the corresponding radio button.
Select ALL to send all the registered data (5 gammas at
maximum) of the current user gamma file to a camera.
c Auto Send check box
Check this box to automatically send the data to a camera
each time you edit the graph. This is convenient to
immediately confirm the results of editing.
Note
Responses to graph operations may become slower, as
data are transmitted each time you change the graph.
d Select Camera Table area
The names of the user gammas installed in the connected
camera are displayed.
You can switch the user gamma on the camera by using
the radio buttons.
22
Functions and Operations of the Component Windows
a Connect button and
indicator
b Send button and radio
buttons for selecting
gamma number on
camera
c Auto Send check box
d Select Camera Table area

To connect a camera

1
Connect the CvpFileEditor-installed PC to the
camera via Ethernet or using a cross cable.
2
Select "Camera IP Setting" from the User Gamma
menu to open the Ethernet Setting window.
3
Enter the IP address of the camera then click on OK
to close the Ethernet Setting window.
4
Click on the Connect button in the Camera Control
window.
The connection to the camera is established, and the
indicator to the left of the button changes color to
green.
To transmit the data to the connected
camera
1
Specify the target user gamma number with a radio
button. (Select ALL to send all gammas of the current
file.)
2
Click on the Send button.
Send button
Enter the IP address
of the camera.
To send the selected gamma
to the connected camera,
specify the target user
gamma number on the
camera with the
corresponding radio button.
To send the current user
gamma file (group of 5
gammas at maximum),
select ALL.
The display is automatically
updated when transmission
is completed.