[Expo.meter]; [Lens Resume] - Panasonic Lumix DMC-FZ70 Owner's Manual

Basics
• For the setting procedures of the menu.

[Expo.Meter]

You can set whether to display the exposure meter when
operations such as shutter speed and aperture value
adjustments or Exposure Compensation are performed.
■
Settings: [ON] / [OFF]
●
If the exposure meter is not displayed, press the [DISP.] button to switch the display of
the LCD monitor/viewfinder.
●
The exposure meter will turn off if no operation is performed for approximately
4 seconds.

[Lens Resume]

●
[Zoom Resume]
When you turn this unit on, the zoom positions when you last turned this unit off are
automatically restored.
■
Settings: [ON] / [OFF]
●
[MF Resume]
It will memorize the MF position set with the Manual Focus. It will resume the
memorized Manual Focus position when you return to Manual Focus Recording.
■
Settings: [ON] / [OFF]
●
MF position will be memorized in the following cases:
• Turning the camera off
• When switching to a type of focus other than Manual Focus
• When switched to playback mode
●
Zoom position will be set all the way to wide when the [Zoom Resume] is set to [OFF].
●
When [MF Resume] is set to [OFF], MF position will be the distance focused at the
time of recording in Manual Focus.
●
Depending on the recording conditions, the memorized MF positions and resumed
MF positions might be different. Before you start recording, make sure the subject is
in focus.
(→57)
- 67 -
Using the [Setup] menu
Exposure meter
VQT5B76