[Monitor Display] / [Viewfinder]; [Monitor Luminance] - Panasonic Lumix DMC-FZ70 Owner's Manual

Basics
• For the setting procedures of the menu.

[Monitor Display] / [Viewfinder]

Brightness, color, or red or blue tint of the LCD monitor/viewfinder is adjusted.
■
Settings
[Brightness]
[Contrast · Saturation]
[Red Tint]
[Blue Tint]
Press to select the setting item and press
Press [MENU/SET]
●
It will adjust the LCD monitor when the LCD monitor is in use, and the viewfinder
when the viewfinder is in use.
●
Some subjects may look different from their actual appearance, but the recorded
picture will not be affected.

[Monitor Luminance]

These menu settings make it easier to see the LCD monitor when you are in bright
places.
■
Settings
([Auto Power Monitor])
([Power Monitor])
[OFF]
●
Cannot select [
●
[ ] ([Power Monitor]) returns to ordinary brightness if there is no operation for
30 seconds when recording. (Press any button to make the screen brighter again.)
●
Because the picture shown on the LCD monitor screen emphasizes brightness, some
subjects may look different than their actual appearance, but this will not affect the
recorded picture.
●
Setting [Monitor Luminance] reduces the operating time.
Adjust the brightness.
Adjust the contrast or clarity of colors.
Adjust the red tint.
Adjust the blue tint.
The brightness is adjusted automatically depending on how bright it
is around the camera.
The brightness becomes higher than usual for easy viewing outdoors.
] ([Auto Power Monitor]) in playback mode.
(→57)
to make adjustments
—
- 63 -
Using the [Setup] menu
VQT5B76