Table of Contents
Advertisement
DX4™
•
For adult use only - Keep out of the reach of children.
•
Always use a power cord that meets the manufactures exact power specifi cations
Always use a power cord that meets the manufactures exact power specifi cations
•
Disconnect from main power before making any type of connection.
•
Do not remove the mixer covers under any conditions. There are no user serviceable parts inside.
•
Never plug this mixer in to a dimmer pack
•
Always be sure to mount this mixer in an area that will allow proper ventilation.
Always be sure to mount this mixer in an area that will allow proper ventilation.
•
Do not attempt to operate this mixer, if it becomes damaged in any way.
•
Never operate this mixer when it's covers are removed
•
To reduce the risk of electrical shock or fi re, do not expose this mixer rain or moisture
•
This mixer is intended for indoor use only, use of this product outdoors voids all warranties.
•
During long periods of non-use, disconnect the mixer's main power.
•
Always mount this mixer in safe and stable matter.
Always mount this mixer in safe and stable matter.
•
Power Cord Protection - Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying particular attention to cords
at plugs, convenience receptacles, and the point where they exit from the mixer.
•
Cleaning -The mixer should be cleaned only as recommended by the manufacturer.
•
Heat -The mixer should be situated away from heat sources such as radiators, heat registers,
stoves, or other mixers (including amplifiers) that produce heat.
•
Be sure to save the packing carton in case you may ever have to return the mixer for service.
•
Read all documentation before attempting to operate your new mixer. Please save all your docu-
mentation for future reference.
•
Do not spill water or other liquids in to or on to your mixer.
•
Be sure that the local power outlet matches that of the required voltage for your mixer.
•
Do not attempt to operate this mixer if the power cord has been frayed or broken. Please route
your power cord out of the way of foot traffi c .
•
Always have the front gain controls set to their lowest level during initial power-up to prevent
speaker damage.
•
The mixer should be serviced by qualified service personnel when:
A. Objects have fallen, or liquid has been spilled into the mixer.
B. The mixer has been exposed to rain or water.
C. The mixer does not appear to operate normally or exhibits a marked change in
performance.
DX4™
• Equipped with high quality Crossfader
• User Replaceable Crossfader
• High Headphones Output
• Cue Mixing
• Extremely clean signal to noise ratio
• Two Turntable Ground Prongs
• Soft-touch rubber knobs for better control
• External Power Supply
American Audio
- www.americandj.com - DX4™ Instruction Manual Page 3
©
®
Safety Precautions
• Low Residue Resistance Crossfader
• 4 Band Master EQ
• 2 Phono, & 6 Line Level Inputs
• Split Cue Monitoring
• Assignable Crossfader
• Separate Booth Level Output
• Balanced XLR Outputs
• 2 Mic Inputs
Main Features
Advertisement
Table of Contents
