Adaptec 19160 - SCSI Card Storage Controller U160 160 MBps Reference page 13

4 Double-click the SCSI controllers icon. The software driver for
the Adaptec SCSI Card 19160 is listed as "Adaptec 19160,
29160(N), 39160, AHA-3960D, AIC-7892/ 7899 Ultra160 PCI
SCSI Controller."
If the driver is listed, the Adaptec SCSI Card 19160 driver is
loading properly.
If the driver is listed but has an exclamation mark inside a
yellow circle, the software driver may conflict with other
hardware using the same resources. Double-click the icon
to see the device status and possible solutions.
If the driver is listed but has an "X" inside a red circle, the
Adaptec SCSI Card 19160 software driver is disabled and
isn't loading.
If the SCSI Controller icon or the Adaptec SCSI Card 19160
software driver is not listed, reinstall the driver that was
included with the SCSI card. (For instructions on how to do
this, refer to the Ultra160 Family Manager Set User's Guide.)
If there is a ? inside a yellow circle under Other in the
Device Manager, double-click that device, go to the Drivers
tab, and click Update Driver. Follow the on-screen instruc-
tions.
An "X" inside a red circle appears with the Adaptec SCSI Card 19160
software driver in Device Manager. What does this mean?
It means that the Adaptec SCSI Card 19160 software driver is dis-
abled and isn't loading.
To enable the driver
1 Double-click the Adaptec SCSI Card 19160 software driver in
Device Manager.
2 Select the General tab and click the Original Configuration
(current) box.
Troubleshooting
7