Specifications; Q-Sd - American Audio Q-SD User Manual

Q-SD

Model:
poWer suppLY:
DiMensions:
WeiGht:
crossFaDer:
poWer consuMption:
heaDphone iMpeDance:
operatinG teMperature:
Input Impedence & Sensitivity: (EQ Flat, Maximum gain, Load = 100k OHM
Line:
auX:
phono:
Microphone:
Output Impedence & Sensitivity
rec out (rca):
Master (unBaL):
Master (XLr):
Zone:
phones: (LOAD=32 OHMS)
Frequency response: (eQ Flat, Maximum Gain)
Line/auX:
phono:
Mic:
THD - Total Harmonic Distortion: (EQ Flat, Maximum gain, W/20kHz LPF):
Line/auX:
phono:
Mic:
Maximum Input: (1kHz Input, Master Output, THD=10%, EQ Flat, Maximum gain)
Line/auX:
phono:
Mic:
Maximum Output: (EQ FLAT, Master Output, THD=10%)
Master/Zone:
phones:
S/N Ratio: (Maximum gain, EQ Flat, W/20kHz LPF, A-Weighted)
Line/auX:
phono:
Mic:
cross taLk: (Maximum gain, EQ Flat, Master Output)
Line, auX, phono:
American Audio - www.americanaudio.us - Q-SD Instruction Manual Page 34
© ®
TECHNICAL SPECIfICATIONS
Q-SD 4 Channel Mixer/ SD Player
Dual Voltage:
AC 115v~60Hz/230v-50Hz, User Selectable
Single Voltage:
AC 100V, 50/60Hz (For Japan)
AC 110V, 60Hz (For Colombia)
AC 120V, 60Hz (For USA, and Canada)
AC 127V, 60Hz (For Mexico)
AC 220V, 50Hz (For Chile, and Argentina)
AC 220V, 60Hz (For Philippines, and korea)
AC 230V, 50Hz (For Europe, U.k., New Zealand, South Africa,
and Singapore)
AC 240V, 50Hz (For Australia)
482.6mm (W) x 177mm (D) x 109.6mm (H)
8.27 Lbs. / 3.75kgs.
Feather Fader Plus - Fader Start Control -
Low grounding impedance crossfader
12W typical, 21W w/ full headphone output
16~32 Ohms
5 to 35 deg. C; Humidity: 25 to 85% RH
(non-condensing); Storage Temperature: -20 to 60 deg. C
10k OHM / -14dBV (200mV)
47k OHM / -14dBV (200mV)
47k OHM / -54dBV (2mV)
10k OHM / -54dBV (2mV)
2.2k OHM / -10dBV (316mV) +/-2dB
1k OHM /0dBV (1V) +/-2dB
600 OHM / +4dBm (1.23V) +/-2dB
1k OHM / 0dBV (1V) +/-2dB
33 OHM / 0dBV (1V) +/-2dB (Cue Mixing At Center)
20 - 20kHz +/-2dB
20 - 20kHz +2 /-3dB (RIAA)
20 - 20kHz +2 /-3dB
LESS THAN 0.02% 20 - 20kHz
LESS THAN 0.15% @ 1kHz (A-Weighted)
LESS THAN 0.2% @ 1kHz (A-Weighted)
MORE THAN +4dBV
MORE THAN -36dBV
MORE THAN -36dBV
MORE THAN +18 dBV (8.0V)
MORE THAN +3dBV (1.4V) Load=32 OHM
MORE THAN 90dB
MORE THAN 66dB
MORE THAN 65dB
MORE THAN 65dB @ 1kHz BETWEEN CHANNELS L & R