Table of Contents
Advertisement
Verifying Operation and Replacing Cover
Verifying Proper Operation
After making the required electrical connections,
confi rm proper operation of the blower.
1. Temporarily re-install the remote blower cover,
using 2 screws per side.
2. Turn on the power supply at the circuit breaker.
3. Refer to the Telescoping Down Draft Installation
Instructions for additional instructions on proper
operation.
DO NOT allow any objects to contact any moving
parts or electrical connections while verifying blower
operation.
Replace the Cover
Re-attach the Blower Cover to the Main Blower
housing using the (16) silver hex head screws.
(16) Silver
Hex Head Screws
15
Advertisement
Table of Contents
