Projecting/Adjusting An Image; Projecting An Image - Sony VPL-SW525 Operating Instructions Manual

B Projecting/Adjusting an Image

Projecting an Image

The size of a projected image depends on the distance between the projector and screen. Install
the projector so that the projected image fits the screen size. For details on projection distances
and projected image sizes, see
Notes
• Due to the characteristics of ultra short throw projector, the image may appear uneven on a
projection surface that is not absolutely flat. This is not a malfunction of the projector.
• Project the image on a flat surface.
5
VPL-SW535C/SW525C/
SW535/SW525
Input
Video
S-Video
Input-A
Input-B
Skip
Sel
1
Plug the AC power cord into the wall
outlet.
2
Connect all equipment to the projector
(page 9).
3
Press the ?/1 key to turn on the unit.
4
Turn on the connected equipment.
"Projection Distance and Lens Shift Range" (page 51)
Projector
VPL-SX535
Input
Video
S-Video
Input-A
Input-B
Sel
Skip
5
6
1
Wall outlet
4
2
Computer
Video equipment
5
Select the input source.
Press the INPUT key on the projector to
display the menu for switching input
signal on the screen. Press the INPUT
key repeatedly, or press the
select an image to be projected.
When projecting a computer image,
switch your computer's output to
external display.
Projecting an Image
.
6
3
/ key to
V v
13