3 The cursor will disappear if the
adjustment range limit is reached.
Correcting deflection 1-The right/left edges of the image
1 Move the s by using V/v/B/b to select
the corner you want to correct.
If you push ENTER, you can switch to the
cursor display.
2 You can adjust the deflection of the edges
by using V/v/B/b.
You can adjust the central position of the
edges by using V/v. For the range of
deflection, use B/b. You can adjust the
right/left edge independently.
Note
When adjusting the central position of the
edges, the right and left edges will be set at the
same time.
16
Projecting an Image
Example of cursor display:
You can adjust in all directions.
You can adjust only to the left/
right or downwards.
Adjust using this cursor.